Are baby diapers really suitable as thinner?

With the advent of July, the temperature is getting hotter and hotter in order to reduce the baby’s heat. Mothers are often prone to enter a misconception that the thinner the diaper, the better, the thinner the more airy. The first thing that affects the thickness of diapers, in addition to the structural layer, is the core. In order to comply with the daily habits of some customers, some manufacturers have forcibly reduced the space of the core, so that the polymer material cannot fully mobilize the function of absorbing and locking water. The function of the diaper is greatly affected, and the relative density will definitely be too large after shrinking. Is this thin, really more airy? Next, let us step into the 'scientific research popularization' and understand the truth! The structure of the diaper first, The structural layer is one of the main components of diapers, and it is also a very important part. The structural layer directly touches the baby, so the comfort of the structural layer will also directly affect the baby. Warm wind spunlace non-woven fabric (thicker): It has the characteristics of high bulkiness, good ductility, soft touch, good permeability and water absorption. Spunbond spunlace non-woven fabric (thinner): does not use plant fiber, directly spun into a web from a polymer material object, and is heated and pressed by a roller. It has good physical properties, tensile strength, and elongation. , Tearing, compressive strength, etc. The needles are all excellent, the thickness is very thin, but the softness and wear resistance are not as good as the warm air spunlace non-woven fabric. In order to be able to dissipate the hot body moisture generated by the internal structure of the baby when wearing diapers on time, the process of microfiber warm air spunlace non-woven fabric is used, and the appropriate process can play a better role in ventilation. And it can effectively alleviate the stuffy and humid environment of the baby's butt, greatly reduce the possibility of red butt, and at the same time, the base film feels softer, so that it can touch the baby's facial skin with zero friction. The composite core of diapers The composite core is currently using the best fourth-generation composite core, which is pressed by dust-free paper, spunlace non-woven fabric and water-absorbent resin, without lumps, And effectively guard against red ass. Now that it is pressed by machine, it will be divided into thickness, but does it mean that the thinner it is pressed, the higher it is? First, let’s discuss the structure of the composite core: the composite core structure is a top layer of liquid-permeable plastic sheet (The first hydrophilic particulate matter) The middle and high-level bulking agent spunlace non-woven fabric (the second hydrophilic particulate matter) is wrapped with plastic sheet. Among them, the middle and high-level fluffing agent spunlace non-woven fabric supports the internal space, which makes the internal structure air more retail, and allows the polymer material to absorb more completely, so as to achieve a balance between thinness and ventilation and moisture absorption. Generally, according to the amount of polymer materials, To adjust the spacing of the fluffing agent. A thin diaper will have less polymer material, or the internal space will be too thin, which will affect absorption and ventilation. Therefore, a reasonable thickness is a high-quality diaper. The product is made by the manufacturer using scientific calculations. , Let the thinness reach an extremely balanced quality diapers. Next: How to act as a proxy for diapers? Let's take a look at the process of proxy