How does a mother choose a diaper suitable for her baby?

Many mothers have responded that they have used many brands of diapers and cannot choose the ones that are suitable for their own babies. Some have side leakage, some are airtight, some have hard fabrics, and some cause their babies to red ass. Talk about how to choose a high-quality, suitable diaper. The first step is to unpack and smell the diapers. In the production process, a variety of raw materials and auxiliary materials are used, such as glue, pulp, elastic thread, etc., and all products in the production are produced in an assembly line, which is packaged at once. A small amount of smell inside is normal. A good brand will choose better materials, so the smell will dissipate soon after opening. If the smell does not dissipate for a long time after disassembly, or even has a pungent smell, it means that the diapers use inferior materials. Mothers are advised Do not buy. Generally, diapers are punched with some vents when they leave the factory in order to quickly dissipate the smell left by the machine's bonding and heating process.　　　　The second step is to touch and experience the softness. 　　　　Softness is mainly determined by the variety and quality of the non-woven fabrics used in the inner and outer layers. The two commonly used non-woven fabrics are hot-air non-woven fabrics and spun-bonded non-woven fabrics. Hot-air non-woven fabrics have good bulkiness, soft hand feeling and good air permeability, while spunbond non-woven fabrics have a smoother surface, rough hand feeling and air permeability. Bad. Hot air non-woven fabrics feel thick because they are fluffy. In order to pursue ultra-thinness, some businesses use spunbonded non-woven fabrics. In addition to having a hard feel, spunbond non-woven fabrics are not very breathable.　　　　 The third step is to look at the breathability. 　　　　 diapers are both breathable and will not cause urine to leak out. In addition to good tailoring in design, it is also related to the selection and composition of materials. At present, most brands of diapers add a layer of PE film to the surface to prevent reverse osmosis. The air permeability of diapers depends on the quality of the PE film.　　　　 The fourth step is to look at the quality of water absorption. There are two judgment indicators: water absorption and water absorption speed. Generally speaking, the amount of water absorption mainly depends on the quantity and quality of the polymer. The higher the polymer content, the better the performance and the greater the water absorption. However, parents should pay attention to that the water absorption of diapers is not as good as possible. After all, we do not encourage children to wear two catties of diapers and not change them; and the speed of water absorption mainly depends on the breathability, surface structure and core of the non-woven fabric. The design of the body and the quality of the polymer, this index is the faster the better. The fifth step is to see if there is a leak-proof design. As the baby grows up, the amount of activity increases. If the diaper design is unreasonable, leakage and side leakage are likely to occur. Choosing a leak-proof design can prevent the baby's excrement from leaking ; At the same time, pay attention to whether the leg protection is too tight to the baby.　　　　 The sixth step is to compare the shape after use. After a good product absorbs a certain amount of liquid, it can maintain a complete and uniform shape. However, after using products with poor quality, the absorbent layer will become loose, clumped, lumped, and faulted.　　　　 The seventh step is to compare the dryness after use. 　　　　 Good quality diapers can still maintain a dry surface after absorbing a large amount of urine. The dryness and the diversion layer of the diaper are related to the water-locking performance of the polymer, which allows the urine to spread quickly and absorb evenly, and at the same time firmly lock the water and prevent reverse osmosis.　　　　The eighth step is to disassemble and see the core structure. The quality of the absorbent material directly affects the absorption performance of the product. The diapers generally use plant fiber material fluff pulp. If you want to enhance the absorption effect and lock the moisture, a certain amount of polymer needs to be added to the absorption layer.　　　　 Many mothers have responded that they use other diapers to get up and open the diapers in the morning. There are crystalline things inside, which are the polymer after absorbing the urine, because they are not properly wrapped or the diapers are not properly sewn, causing leakage. Next: Choosing the correct size of diapers can prevent side leakage. Previous: How to choose the right diapers for your baby in summer? Keywords of this article: diapers